|
LUGB-90 meter is a new flow concussive Meter based on
the principle of kamenwojie, it has the advantage of
wide measurement range, low pressure loss, stable
characters, high accuracy and convenient setter and use
. Widely used to measure the volume and quality flux of
liquid, gas and vapor medium in the blocked industry
pipe.
second:
functional characters and technical parameter
1.
Measurement media：vapor,
gas, liquid
2.
Two row liquid crystal showing accumulation flux and
instant flux.
3.
Lithium cell supply inside, have no use for outside
power source.
4.
Small power loss design, a couple of +3V lithium cell
can work continually over one and half years.
5.
The induction cell of transducer is not contact with the
detected medium directly, stable abilities, high
reliability.
6.
There are no mobile unit in the transducer, simple
structure and fastness, low pressure loss,
small enlargement of
dimension, long service life.
7.
measurement rang reach 10：1~15：1
8.
measurement range: the normal work range,
Reynolds number20，000-7，000，000；the
export signal is not affected by the temperature,
pressure, viscosity and component of the liquid.
Possible measurement range, Reynolds number8，000-7，000，000
9.
the precision degree: liquid, ±1.0% of designation
value;gas, ±1.0% of designation value;vapor, ±1.5% of
designation value;gas
10.
signal waveform: ,OC impulse output; b, current
4-20mA(two-wire system
and three-wire system).
11.
supply pressure:
+24VDC(supply when the signal asked to be exported)
12.
Medium temperature: normal type
a.-40℃～+130℃；b.-10℃～+250℃;
13.
Work pressure: 0-2.5Mpa,
flange
cramp connection(according to the request of customer,
can provide other pressure degree, need to
custom-tailor)
14.
pressure lose;Δ
P=1.079*10-6*
ρs*v
2(Δ
P:The pressure loses MPa;
ρ
: the density of measured matter. kg/ m3;
V:the flow rate of measured matter m/s)
15.
The shell material: Carbon steel;stainless steel(1Cr18Ni9Ti)
16.
size (inside diameter of the pipe): 220、25、32、40、50、65、80、125、150、200、250、300
(Caliber more than DN300 is jack-in type)
17.
Environment temperature: -25℃～+55℃;
environment moistness: ≤85%RH.
18.
explosion-protection type:
This separation explosion type;
explosion-protection apparatus:
iaIIcT6
19.
the work
condition fluxs range (unit: m3/h) |
